When decorating a house, the most important thing is not style and quality, but size and flatness. Only when these two factors are in place can the above two situations be achieved. Otherwise, more often than not, perfection in style cannot be achieved, and a difficult operation is leveling. Sometimes, it is difficult to remove the leveling tool, so how can the tile leveling tool be removed? How to level ceramic tiles?
How to remove the tile leveler
The sequence and method of dismantling the leveling template should be carried out in accordance with the provisions of the panel design, following the principles of first supporting and then dismantling, first non load-bearing parts, then load-bearing parts, and top-down. It is strictly prohibited to use a sledgehammer and pry bar to forcefully pry the template during dismantling.
1. First remove the side formwork, and then remove the load-bearing formwork.
2. The combination of large templates should be dismantled in large blocks as a whole.
3. The supporting and connecting components should be dismantled along with the components, and the formwork should be dismantled and transmitted along with the blocks. During dismantling, the formwork and concrete should not be damaged.
4. The dismantled templates and accessories should be sorted and stacked neatly, and the accessories should be placed in the toolbox.
How to level ceramic tiles
1. Cement mortar leveling: suitable for leveling various floors and floors before laying. The leveling thickness is too thick, ranging from 25 to 35mm. If the cement mortar ratio is incorrect, it will cause the surface layer to powder, sand, ash, and crack. The floor (composite floor) forms some gaps with the leveling layer, and when people step on it, the dust on the ground is compressed and dispersed in all directions, and then flows out from the expansion joint. It spreads out through the gaps of the baseboard, forming a phenomenon of dust flying. In addition, areas where cement mortar leveling is not meticulous may experience hollowing.
2. Gypsum leveling: can be used for local leveling, without raising the ground, with a leveling thickness of about 5-20mm, which has almost no effect on the height of the room. It has a fast drying speed, relatively cheap price, and convenient construction. But it can only be used for leveling within a small area.
3. Self leveling: No segregation (various components in cement mortar do not separate during the entire construction process and hydration reaction), no sand, no dust, and no cracks; The shrinkage rate is low, usually between 0.3 and 0.4 thousandths. After hydration reaction, there are no cracks on the surface. Ordinary cement has a high shrinkage rate and is prone to cracks. The construction thickness is relatively thin, ranging from 2-5mm. People can walk on the surface 4-8 hours after construction, and floor paving can be carried out 36-48 hours later. But if we want to do it, we cannot do it locally, we need to do it whole house.
Tile leveler, also known as tile leveler, is a very exciting time for ordinary workers when decorating a new house. They have many ideas but lack experience, so they are very frustrated. Today, the editor will talk to new business owners about the things to pay attention to when tiling tiles.
Tile leveling is a crucial step, and the lobby is an area with a wide range of activities. Generally, we choose tiles, but if the tiles are not properly applied, it will directly affect the new home experience. Previously, when it came to tiling, it was common to directly select experienced craftsmen, such as Sichuan tile workers who were very famous. But if you have bad luck and come across a skilled bricklayer, it will be very frustrating and you cannot replace them halfway. With the advancement of technology, people have invented tile levelers, also known as tile levelers or tile pavers. With this tool, whether it's